Category: Home Improvement
Home Improvement
Showing 209–224 of 744 results
-
Dewalt-DW5366 10 PC Anchor Drive Installation Kit
$54.00Read moreDeWalt premium carbide percussion hammer bits are used primarily for drilling small diameter holes in masonry, concrete, rock, and artificial stone. These bits are used primarily to drill holes for mechanical anchors and fit into standard 3/8 In. and 1/2 In. chucks. With an innovative tip that reduces walking for improved accuracy.
-
Dewalt-DWS5029 118In TrackSaw Replacement Zero-Clearance Anti Splinter Strip
$34.20Read moreDEWALT TrackSaw delivers table saw precision and quality in a portable package. The innovative track allows you to cut accurately, while its rubber edge prevents splintering. Replacement 118-inch, zero-clearance, anti-splinter strip is compatible with TrackSaw system and fits underside of tracks.
-
Dexpan Expansive Demolition Grout 11 Lb. Bucket for Rock Breaking, Concrete Cutting, Excavating. Alternative to Demolition Jack Hammer Breaker, Jackhammer, Concrete Saw, Rock Drill #1 (77-104 F)
$42.30Add to cartConcrete Demolition and Rock Breaking has never been easier with Dexpan® Expansive Demolition Grout. Dexpan® is a powder with amazing 18,000 PSI expansive strength when mixed with water. Poured into drilled holes, Dexpan® can break concrete and rocks safely and quietly, while providing SILENT cracking. It is safer, easier and more cost effective. Note 1) Not recommended for concrete slab less than 6″ in depth. Note 2) You are getting one 11 Lb. Bucket of Dexpan which fills up to 9 lineal feet (2.5 m) of 1.5 inches (3.8 cm) diameter holes. Note 3) Choose correct type of Dexpan® based on rock / concrete temperature. How to use Dexpan? STEP 1) Drilling: Use 1.5 inches (3.8 cm) drill bit, holes should be drilled 1 ft (30 cm) apart. 80-90% of the depth, DO NOT go through. STEP 2) Mixing: In a bucket, combine 0.4 gallons (1.5 liters) of water with one 11 lb. (5 kg.) bag. Mix well to a slurry. (a drill and paddle is recommended) STEP 3) Filling: *Warning: Use of Dexpan in extreme hot temperatures could cause blowouts. Dexpan® slurry should be poured into holes within 10-15 minutes after mixing. Coverage: Normally one 11 lb. (5 kg.) bag can fill up to 9 lineal feet (2.5 meters). STEP 4) Cracking Or Breaking Time: Properly mixed, the cracks may appear after 2-8 hours. Allow 24 hours for best results. **WARNING** IMPORTANT SAFETY PRECAUTIONS and FIRST AID: 1) **WARNING** BLOWOUTS may occur! DO NOT look directly into filled holes. 3) Do not breathe in dust. Avoid eye and skin contact. If eye or skin contact should occur, rinse it off IMMEDIATELY with plenty of water and consult doctor. 4) Keep Dexpan® in DRY storage. Seal box / bag after use. 5) Keep out of reach of children and pets. 6) MSDS (material safety data sheet) is available upon request. * Please leave a Review, we’ll send you a FREE Dexpan Hat.
-
DNA Motoring TOOLS-00205 Pink 44 PCs Portable Tool Kit Household General Repair Claw Hammer Precision Screwdriver Set Hand Tool Canvas Bag
$45.83Add to cartThe 44-piece tool kit is perfect for DIY, home maintenance and daily use. It is a must-have tool kit for handymen, homeowners, repair workers, and also as a perfect addition to personal tool collection or for gifting, housewarming, etc. Package Includes: 1 X Level 1 X Claw Hammer 1 X Utility Knife 26 X Bits 2 X Precision Screwdriver 1 X Measuring Tape 1 X Long Nose Plier 8 X SEA Hex Keys 1 X Box Accessories 1 X Charge Cordless Screwdriver 1 X Canvas bag
-
Dnzzs 12V Pink Cordless Drill Driver Set 3/8” Chuck Lithium-Ion Electric Drill Drivers for DIY Power Drill Kits with Tool Bag and Box, Variable Speed, Keyless Chuck, 20 Drill Bits
$36.90Read more💗💗PINK CORDLESS POWER DRILL CREATES A WARM HOUSE WITH YOU.💗💗 🔧Dnzzs pink 12V cordless driving drill set by virtue of lightweight not only can help females easily access to deal with their DIY, work, or housework, but also enable males to save effort when they work, do home reconstruction, renovation, garden maintenance, garage maintenance, kitchen cleaning, and DIY. Our small drills cordless are devoted to meeting all people’s needs. Whether you are male or female, are a professional mechanic, a robot manufacturer, or a model building enthusiast who requires precision small tools and micro tools, Dnzzs hand drills cordless tools can help you! 🔧Dnzzs 12V electric drill can be used for drilling in wood and plastic ( The small drill set for women is not suitable for hard objects such as masonry and concrete), and also for tightening or loosening screws. Electric cordless drill with 3/8″ keyless chuck equipped with built-in LED light, suitable for DIY and home maintenance.
-
Dremel 100 Series Single Speed Corded Rotary Tool Kit
$36.00Read moreThe Dremel 100 Series Single Speed Corded Rotary Tool Kit offers the ultimate convenience and comfort for prolonged use. Designed for full-speed applications, like routing, cutting, drilling, and sanding. The Dremel 100 Series Single Speed Corded Rotary Tool Kit has powerful performance for shaping, hollowing, grooving, slotting, inlaying, and making tapered holes in soft metals, plastics, and woods–especially on curved surfaces. Its cool ball-bearing construction provides smooth and quiet operation. It’s an ideal rotary tool that gives you consistent operation levels of 35,000 RPM. Includes accessories for cutting, grinding, sharpening, and sanding, and a collet wrench for accessory changes. Two accessory storage cases are included to help keep your Dremel accessories organized, and two Dremel Rotary Attachments. The A550 Rotary Shield Attachment redirects debris and sparks away from the user without interfering with the task at hand. The A576 Dremel Sanding/Grinding Guide improves precision and control on a variety of tasks by providing the support and stability needed for an accurate job.
-
Dremel 100-N/7 Single Speed Rotary Tool Kit with 7 Accessories
$48.96Add to cartThe Dremel Single-Speed Rotary Tool Kit, model number 100-N7, offers versatility and convenience so users can tackle projects with quick and accurate results. Designed for full-speed applications, such as routing and cutting, or drilling and sanding, this tool provides consistent operation levels of 35,000 RPM and comes with seven interchangeable accessories to give each project the desired look and finish. Complete a variety of projects with these adaptable rotary tools with the ability to work with multiple surfaces and materials, wherever single-speed is needed.
-
Dremel 200-1/15 Two Speed Rotary Tool Kit with 1 Attachment 15 Accessories – Hobby Drill, Woodworking Carving Tool, Glass Etcher, Small Pen Sander, Garden Tool Sharpener, Craft and Jewelry Drill
$39.60Add to cartThe Dremel 200 Series rotary tool offers the precision and control required to complete a wide range of projects. Its two-speed settings allow you to use the low-speed setting for lighter-duty applications. The high-speed setting is ideal for heavier duty projects like routing, cutting and sanding applications
-
Dremel 3000-N/18 Variable Speed Rotary Tool, 18 Accessories
$45.16Add to cartThe Dremel 3000 is our best seller rotary tool, designed with improved features and ergonomics for your projects to run smoothly. This corded tool also features the EZ Twist nose cap with an integrated wrench that allows the nose cap to be used as a wrench to tighten accessories and eliminates the need for a separate tool. A more efficient fan design and side vents provide a cooler running tool making it comfortable for extended periods of use. The ability to use all existing Dremel rotary tool accessories and most attachments let the 3000 complete a wide range of applications including cutting, grinding, sanding, carving and polishing a variety of materials.
-
Dremel 36 in. Flex-Shaft Attachment for Rotary Tools
$35.79Add to cartTight spots, nooks, and corners they’re all easily within reach when you add the 225 Flex-Shaft attachment to a Dremel Rotary Tool. The Dremel Flex-Shaft features a flexible 36-inch cable with a 5-inch bend radius, allowing you to comfortably reach your work in a variety of angles. The ergonomic comfort grip hand-piece reduces fatigue and allows for fingertip control to cut, grind, sand, sharpen, polish and more. The Quick Connect system makes it easy to attach to your compatible Dremel rotary tool.
-
Dremel Hses-01 Dremel Home Solutions Electric Screwdriver Usb Rechargeable Kit
$44.10Read moreCompact, intuitive, unintimidating platform of cordless useful tools are perfect for around the home projects, on-the-go, anywhere. Be inspired to do more around the home. Dremel Home Solutions all-in-one Electric screwdriver provides you 8 different bits with power to drive small to large screws. Ideal for general assembly and installation such as driving small and large screws for electrical assembly, cabinetry, furniture, and all tight spaces around the home. Dremel Home Solutions Electric screwdriver makes a great gift. Comes with a two year warranty.
-
Dremel MM35-DR-RT 120V 3.5 Amp Variable Speed Corded Oscillating Multi-Tool Kit (Refurbished)
$37.80Add to cartPowerful: 3.5 Ah motor easily tackles the toughest applications Tool-less accessory change: innovative design for quick, secure accessory change without a wrench Fast and precise cuts: the extra-wide 3.2-degree oscillation angle provides the right speed to tackle any application Variable speed – from 10,000-21,000 OPM for optimal performance and control with a variety of materials Ergonomically optimized: soft grip for comfort and control 7 ft. Durable rubber cord: for a wide working range
-
Dremel MM40 Reconditioned Oscillating Tool
$40.70Add to cartQuick change patented accessory interface eliminates the need for a wrench while making accessory changing simple A high-performance 2.5 Amp motor is 65% more powerful than its predecessor, making it capable of tackling the toughest applications Soft start and electronic feedback for consistent performance in demanding materials and applications Variable speed performance with 10000 – 21000 OPM for optimal precision and control combined with smooth operation
-
Dremel Multi-Max 1-1/4 in. Oscillating Tool Universal Flush Cut Blade Variety Pack for Wood, Metal, Tile and Cement (3-Piece)
$36.22Add to cartMPN: MM488BU Brand: Dremel Multi-Max 1-1/4 in. Oscillating Tool Universal Flush Cut Blade Variety Pack for Wood, Metal, Tile and Cement (3-Piece) Dremel all inclusive swaying extras are the principal really widespread wavering embellishments accessible that require no connector. The one of a kind double interface fits all serious swaying apparatuses, incorporating those with a fast change highlight. The 3 flush slice edges can be utilized to make exact cuts in an assortment of materials, from wood, plastic, drywall and other delicate materials with the MM480U Wood Sharp edge, to wood with nails with the MM482U Edge, to harder materials, for example, metal, screws, hardened steel fasteners, electrifies pipe, mortar, concrete board, record and fired tile with the MM485U Blade. Fits Rockwell, FEIN, Makita, Ridgid, Milwaukee, Bosch, including the DEWALT and Watchman Link snappy change feature Universal double interface straightforwardly fits all tools Includes 3 superior edges: high carbon steel edge for wood cutting applications, bi-metal edge for wood/metal cutting applications and carbide – toothed edge for hard material cutting applications Contents: 1 MM480U wood flush cut edge, 1 MM482U wood and metal flush cut edge, 1 MM485U carbide flush cut blade 3-piece assortment pack for cutting a wide range of materials – wood, metal, plastic, nails, screws, treated steel fasteners, excited line, mortar and machine, concrete board, fiber board, sheet metal, record and artistic tile Use tip: select a medium to high speed Specifications Blade Material – Carbon Steel Tools Item Type – Force Tool Power Device Extra Sort – Wavering Instrument Embellishment/Part Color Family – Black Oscillating Apparatus Connection Type – Blade Number of Pieces – 3 Application Type – Cutting Accessory Fitment – Universal
