Category: Hand Tools
Hand Tools
Showing 305–320 of 322 results
-
Whetstone Grit Premium Whetstone Cut Sharpening Stone Set Ideal Sharpener for All Blades Non Slip Base Cutter Sharpener
$42.30Add to cartFeatures: This complete cutter sharpening kit comes with double-sided (400/1000 3000/8000) premium quality whetstone, a bamboo base for holding the stone, and a cutter sharpening angle guide. Our professional-grade cutter sharpener stone is highly practical and long-lasting. This whetstone sharpener can sharpen any blade out there. A cutter sharpening angle guide allows you to maintain the correct angle and safely apply consistent pressure while sharpening the blade. This sharpening Water stone kit is extremely user-friendly and easy to assemble. Made from white corundum, so expensive oil is not required, just use some water and you’re good to go. The non-slip bamboo holder keeps everything secure, so you never have to worry about it slipping off the counter.
-
Wiha 12 Piece Insulated Slimline Blade Belt Set
$40.98Add to cartWiha’s Insulated SlimLine Blade Sets feature direct molded double insulation protection against electrical shock and equipment damage due to arc flash. Set includes Slotted 4.0mm and 5.5mm, Phillips #1 and #2, Square #1 and #2, Torx T15, T20, and T25, Hex 2.5, 3.0, and 4.0mm SlimLine Blades with 33% narrower blade shafts to access hard to reach deep set fasteners and a belt selector for convenient blade
-
Wiha 75980 ESD Safe Go Box MicroBits Set, Black – 39 Piece
$65.56Add to cartWihas 39 Piece ESD Safe Go Box MicroBits Set has the tools to get the job done. The set contains an intelligent selection of micro bits including: Slotted, Phillips, Hex Metric, Torx, Pentalobe. The set is equipped with ESD safe MicroBit handle, a 4 inch MicroBit Extension and a magnetic hex MicroBit adapter offering the convenience to adapt the tool’s configuration. All of the tools come conveniently in a pocketsize secure clasped metal case for easy identification and storage. The set consist of Wiha premium quality tool steel engineered for strength and durability, have a chrome-plated satin finish for corrosion protection, and feature exact fit precision machined tips for reduced cam-out. Features Efficiency contains microbit adapter for multi-use functionality Durability chrome-plated satin finish for corrosion protection Portability conveniently stored in a pocket-sized metal case for easy storage and security 39 PieceSpecifications Color: Black Material: Metal, Steel Head Type: Slotted, phillips, hex metric, torx, pentalobe Bit Drive Size: 4mm Hex Micro Bit Phillips Sizes: 000, 00, 0, 1, 2 Slotted Sizes: 0.80mm -1/32″, 1.2mm – 3/64″, 1.5mm – 1/16″, 1.8mm – 1/16″, 2.0mm – 5/64″, 2.5mm – 3/32″, 3.0mm – 1/8″, 3.5mm – 9/64″, 4.0mm – 5/32″ Hex Metric Sizes: 1.3mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm Torx Sizes: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10 Pentalobe Sizes: PL1, PL2, PL3, PL4, PL5, PL6 Weight: 0.5 lbs – SKU: WHL8074
-
Wirefy Heat Shrink Wire Connectors Kit – Ring, Fork, Hook, Spade & Butt Splice – 22-10 Gauge – 540 PCS
$46.69Add to cartHeat Shrink Wire Connectors: Super Versatile Assortment Wirefy is offering the most versatile heat shrink wire connectors kit on the market. In this assortment, we’ve included an extensive selection of the most common terminal types: butt connectors, rings, forks, hooks, male/female spade terminals. You will find each connector type in 3 industry standard sizes: Red (22-16 AWG), Blue (16-14 AWG) and Yellow (12-10 AWG). Heat Shrink Wire Connectors are Superior to Vinyl and Nylon Electrical Terminals Unlike their vinyl and nylon counterparts, heat shrink wire connectors seal the wire from harsh marine and automotive environments. Heat activated adhesive provides additional protection against strain, abrasion and vibration. Heat Shrink Connectors Are Super Easy to Use Wirefy heat shrink connectors turn any electrical wiring job into a fast and highly efficient process. Simply crimp your electrical terminal and apply heat. Professional grade electrical connections can be made in seconds. For the best results we recommend using a heat gun (helps to distribute heat move evenly) and a crimping tool designed specifically for heat shrink connectors (prevents damages to heat shrink insulation when crimping). Heat Shrink Electrical Connectors: A Multitude of Applications Heat shrink wire connectors are commonly used in marine, automotive, RC, motorcycle and home electrical projects. They come super handy in the harsh environments that require additional protection from moist, dust, stretch, heat and chemicals. These professional shrink connectors will last for decades, preventing corrosion and ensuring maximum current flow.
-
Wright Tool 3/4″ Dr. Deep Impact Sockets, 3/4 in Drive, 1 11/16 in, 6 Points – 1 EA (875-6954)
$60.14Add to cart3/4″ Dr. Deep Impact Sockets, 3/4 in Drive, 1 11/16 in, 6 Points Wright Tool 3/4″ Dr. Deep Impact Sockets Opening Size [Nom]: 1 11/16 in Drive Size [Nom]: 3/4 in Wt.: 2.45 lb Drive Type: Square Material: Alloy Steel Finish: Black Head Width [Nom]: 2 1/2 in (opening side); 1 29/32 in (drive side) Measuring System: Inch Locking Type: Pin No. of Points: 6 Overall Length [Nom]: 3 1/2 in
-
XtremepowerUS 1/2″ DR Torque Wrench Multiplier Lug Nut Labor Saving Wrench Remover Set w/ Carrying Case
$48.38Add to cartThis car saving wrench is ideal for wheel wrench of small vehicle. It is designed for a car’s wheel wrench for easy loosening of truck tires. Lug nuts or car tires by using less energy to reach a sufficient output torque without impact or Compressor needed. Professional Labor Saving Wrench is a newly designed for car wheel wrench for easy loosen truck tires lug nut or car tires by using less labor to reach a sufficient output torque without impact or Compressor needed. When your normal wrench is not able to do the job on some stuck lug nuts, you really need to ramp up your torque! The purpose here is to give extra leverage on tight bolts where a conventional tool is not going to give you the power you need to loosen them.. An important part of any professional tool kit, especially when working with trucks and construction. Heat Treated Alloy Steel Construction. With the big trans-ratio, it will allow more output torque while using less force.
-
Yescom 10 Ton Hydraulic Wire Crimper Battery Cable Lug Terminal Crimping Tool with 9 Dies
$40.11Add to cartGreat Compatibility – 10 Ton hydraulic wire crimper features 9 sets of dies for providing large crimping range from 4 to 70 square millimeters, fitting for 1/8†to 3/16†size copper and aluminum electrical wires, lugs and compressible battery terminal ends, ideal for meeting your different crimping needs. Hydraulic Design – Hydraulic mechanism for providing 10-ton maximum crimping power to crimp wires easily and rotary on/off knob for quick release, when the pressure reaches the maximum valve, it will release automatically to prevent over pressure; hydraulic crimper is much easier than using a hand crimping, more efficient and use less strength. Strong Steel Construction – Crimper features heat-treated 45# steel body and 40Cr steel crimping head for ensuring high strength and good toughness, suitable for long time repeated use, durable hardened steel dies with chrome finish for frequent changing. Convenient & Portable – C-style head for easy changing the dies and fixing the wire in position; long ergonomic handle for convenient and labor-saving operation; blow-molded carrying case with handle for easy storage & transportation and keeping all accessories in place. Wide Application – Widely used for crimping copper and aluminum welding cables, power wires and other electrical cables which are applied on building wiring, connecting battery with wire 10 Ton Hydraulic Wire Crimper Battery Cable Lug Terminal Crimping Tool w/ 9 Dies: Specifications: – Length: 12 3/16†(31 cm) – Crimping Range of 9 Dies: 4, 6, 8, 10, 16, 25, 35, 50, 70 (square millimeter) – Fits For: 1/8†to 3/16†(12 AWG to 2/0 AWG) copper and aluminum wires – Maximum Crimping Power: 10 Ton – Stroke: 3/8†(10 mm) – Material: 45# Steel, 40Cr Steel – Net Weight: 5.2 Lbs (2.37 kg) Package Contents: – 1x 10-Ton Hydraulic Wire Crimper – 9 Sets of Crimping Dies – 1 Set of Seal Rings – 1x Plastic Carrying Case – 1x Manual
-
Yescom 12pcs Ratchet Wrench Set 8-19mm Metric Combination Spanner Flexible Head Auto Car Tool Kit
$38.70Read moreFeatures: – Sturdy Steel Construction – 12Pcs of ratchet wrenches are made of high strength 45# steel and chrome vanadium steel for providing sturdiness, wear-resistance and durability; high polished chrome finish for corrosion & rust resistance; ideal for different kinds of repair works – Precise & Efficient – Precision-machined 12-point box end and 72 teeth ratchet gear which needs only a 5-degree working swing arc for providing high torque to tighten or loosen any bolts without rounding, suitable for any narrow space – Easy to Use – 180-degree pivoting flexible head and open end for easy & efficient operating and reducing fatigue while using the wrenches – Easy Storage – Each wrench features compact size and light weight, easy to carry and use; comes in a tool bag for storage and easy transportation – Wide Application – Combination spanner set can be widely used in home appliance repair, pipeline repair, mechanical & electrician repair, auto & bicycle repair and maintenance, etc Specifications: – Metric Sizes: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm – SAE sizes: 5/16″, 3/8″, 3/8″, 7/16″, 1/2″, 1/2″, 9/16″, 9/16″, 5/8″, 11/16″, 11/16″, 3/4″ – Main Body Material: 45# steel – Ratchet Material: chrome-vanadium steel – Net Weight: 4.63 Lbs (2.1 kg) Package Contents: – 12x Ratchet Wrenches – 1x Oxford Cloth
-
Yost Model Bv-4 4″ Bench Vise
$40.11Add to cartThe Yost BV-4 four-inch bench vise is an all-purpose bench vise. A staple for any home workshop, no matter what your job is. Built for durability and dependability, this vise is constructed from 30,000 PSI cast iron. The replaceable serrated jaws will prevent objects from moving around once you have clamped them in place. A large anvil on the back of the vise is perfect for forming and shaping metal pieces. The anvil is machined to provide a smooth work surface. The 120-degree swivel base allows this vise to be positioned in to clamp parts with ease. The dual lockdowns on the vise are designed to keep the vise in place once in position. The acme threaded main screw provides smooth operation.
