Category: Tools
Tools
Showing 209–224 of 331 results
-
Milwaukee M18 Fuel 4-1/2 in. / 5 in. Grinder, Paddle Switch No-Lock
$185.47Read moreThe world’s first cordless grinder delivers the power of a corded grinder with up to 2X more run time and up to 10X longer motor life. The M18 FUELâ„¢ 4-1/2 In. / 5 In. grinder supplies maximum sustained power to complete the toughest grinding, surface preparation and cutting applications. The POWERSTATEâ„¢ brushless motor provides up to 10X longer motor life and lower cost of ownership. The M18â„¢ REDLITHIUMâ„¢ XC5.0 battery pack (not included) delivers up to 4X more run time and 20% more power. The grinder features REDLINK Plusâ„¢ intelligence, the most advanced system of cordless power tool electronics, for maximum performance. The 18 Volt lithium-ion grinder’s thin body design gives it optimized balance to rest easily in your hands. Tool-free accessory changes and guard adjustments mean less downtime during work. The grinder is built with the same tool body, gearing system and anti-vibration side handle as Milwaukee’s legendary high-performance corded grinders for maximum durability on the job. Grinding wheel sold separately.
-
Milwaukee Power Tools 49220130 Contractors Self Feed 7 Piece Auger Bit Set
$146.30Read moreMilwaukee 49220130 Selfeed Bit Contractors Kit 7pce with all sizes having removable and replaceable feed screws Other features of the 49220130 Milwaukee Selfeed Contractors Kit include two feed screws supplied with each bit feed screw provides fast effortless even through gummy woods plus internal cutting plane shaves hole radius for clean and smooth holes without pressure Key Features All sizes have removable and replaceable feed screws Large selfeed drills in 76 92 and 116 mm sizes have double internal cutter blades that shave hole radius for clean smooth holes without pressure Two feed screws supplied with each bit Feed screw provides fast effortless even in gummy woods Internal cutting plane shaves hole radius for clean smooth holes without pressure Contains Selfeed bits 25 29 32 38 44 54 65 mm extension 140 mm length feed screws.
-
Monster Trucks 660 Lbs. Capacity Stick Handle Aluminum Hand Truck with Foam Rubber Tires
$149.72Add to cartThe SUPER MAXX Aluminum Hand Truck from Monster Trucks is constructed with high-strength aluminum. It offers a lightweight alternative to heavier steel hand trucks. It has long-lasting foam tires and a stick handle.
-
Monster Trucks MT20008 Aluminum Hand Truck with Foam Rubber Tires (Loop Handle)
$176.25Read moreThe Monster Trucks mission is to provide the highest level of service, integrity and product value to ensure complete customer satisfaction. This SUPER MAXX II Aluminum Cart with Foam Rubber Tires features a lightweight, high-strength aluminum construction that provides a lightweight alternative to heavier steel hand trucks. The 10 in. foam tires are lightweight and long lasting. This hand truck has a loop handle.
-
Monster Trucks TUFF MAXX 660 Lbs. Capacity Aluminum Hand Truck
$166.05Read moreThe TUFF MAXX Aluminum Hand Truck from Monster Trucks is constructed with high-strength aluminum. This makes it a lightweight alternative to heavier steel hand trucks. It has long-lasting solid rubber tires and a stick handle.
-
MSA Safety Works 10095901 Fall Protection Kit
$107.41Add to cartHighlights: Portable and convenient Designed to meet the needs of roofing and ariel lift work to the most common fall protection applications ANSI A10.32 and applicable OSHA regulations Standard vest style 3 D ring harness Temp roof anchor Polysteel 25’….
-
Nitrocat Composite Twin Hammer Air Impact Wrench, 1/2″ Drive Size, 900 Max Torque
$157.17Add to cartThe NITROCAT 1375-XL is a great lightweight “mini” 1/2 with a no non-sense, hard hitting Twin Hammer impact wrench that releases 900 (ft-lbs.) of Loosening Torque this tool outperforms anything in its class. Used on brake calipers, tire removal, medium bolt removal.
-
Nitrocat Twin Clutch Air Impact Wrench, 1/2″ Drive Size, 1295 Max Torque
$190.06Add to cartThe NITROCAT 1200-K is a no non-sense, hard hitting 1/2 impact wrench that outperforms anything in its class. Inside the NITROCAT lies some serious power & groundbreaking technology. The 1200-K is engineered with the extreme hard hitting Twin Clutch mechanism, built for performance. Features Extreme and Smooth hitting impactRecommended for high torque applicationsKevlar reinforced “body armor” composite housing.
-
Nitrocat Twin Hammer Air Impact Wrench, 3/8″ Drive Size, 700 Max Torque
$149.38Add to cartThe NITROCAT 1355-XL is a no non-sense, hard hitting 3/8″ impact wrench that incorporates the Twin Hammer mechanism. With an industry leading 700 (ft-lbs.) of Loosening Torque and 1,750 Blows Per Minute, the 1355-XL will give you all the torque you need and tremendous speed to get the job done.
-
Nova 9034 5 Piece HSS Standard Chisel Set, 5 Piece
$154.89Read moreNova 9034 Five piece standard size turning chisel set contains a popular selection of the most common turning chisels. Including a 3/8″ spindle gouge, 3/4″ roughing gouge, 3/8″ fingernail bowl gouge, 1/2″ round nose scraper, and a 1/2″ oval skew scraper all packed in a sturdy, reusable carton.
-
NOVA Big Chuck Work Accessory Jaw Bundle (Includes JS130N, PJSN, and 6017)
$162.44Read moreThe NOVA 6037 Big Chuck Work Accessory Bundle contains the 3 most popular NOVA Chuck Accessory Jaws for big work. Add this bundle to your NOVA chuck (G3, SuperNOVA2, or Titan II chucks), and you’re covered with the most popular accessory add-ons for most larger wood turning projects. It contains the NOVA JS130N 130mm (5 in.) Jaws, the NOVA 6017 75mm (3 in.) Long Nose Jaws and the NOVA PJSN PowerGrip Jaws in one convenient bundle, for that extra-large chucking work. These are accessories for NOVA Chucks, designed to expand your range and capacity of your standard NOVA Chuck for specific projects and applications. Universally fits to any NOVA Chuck* for maximum flexiblity, saving money as duplicate accessories are not needed for different NOVA Chucks. The NOVA JS130N 130mm (5 in.) Chuck Accessory Jaw Set is designed to mount big bowls, up to 29 in.in diameter. They are designed particularly for the expanded dovetail, reverse dovetail for gripping footed bowls. The NOVA 6017 75mm (3 in.) Long Nosed Chuck Accessory Jaw Set has a 2 in. rise above their base which means a very long reach, deep inside bowls. This is a very versatile jaw with tremendous holding power externally and internally. An ideal set for green wood turning. The internal features dovetail grip for holding footed bowls and other footed work pieces. The NOVA PJSN PowerGrip Chuck Accessory Jaw Set is the most powerful jaw available in the NOVA range for large spigot/hollow form turning on the larger NOVA Chucks.
-
NuMax S18GLCNDH Pneumatic 18 Gauge 1-3/4″ L-Cleat Flooring Nailer
$112.59Add to cartThe NuMax S18GLCNDH Pneumatic 18-Gauge 1-3/4″ L-Cleat Dual Handle Flooring Nailer is specifically designed for the installation of most 3/8″ to 3/4″ tongue and groove hardwood flooring. This air powered flooring nailer comes with three interchangeable base plates, and is compatible with 18 gauge L-cleats from 1-1/4″ to 1-3/4″. The dual handle design allows you to use either the short handle or extended handle, depending on whether you prefer to stand or kneel during operation. This convenient option will save your back and help to reduce fatigue when working for long stretches of time. A no mar foot eliminates damage to finished flooring surface and ensures professional results for DIYers as well as construction contractors. Durably constructed of lightweight and high strength aluminum with heat treated steel parts, this dual handle flooring nailer is built to last. The Pneumatic 18-Gauge 1-3/4″ L-Cleat Dual Handle Flooring Nailer includes a fiberglass mallet with a padded grip and rubber head, three interchangeable base plates, air tool oil, and adjustment tools, and is covered by NuMax’s 1 Year Limited Warranty and 30 Day Wearable Parts Warranty.
-
NuMax S50LSDH Pneumatic 2-in-1 Dual Handle Flooring Nailer and Stapler
$99.25Add to cartThe NuMax S50LSDH Pneumatic 2-in-1 15.5-Gauge and 16-Gauge 2″ Dual Handle Flooring Nailer and Stapler is an excellent choice when installing most 1/2″ to 3/4″ solid or engineered tongue and groove flooring including cherry, oak, maple, and walnut ? along with bamboo or exotic flooring. This air powered flooring nailer and stapler combo tool comes with three interchangeable base plates, and is compatible with 16 gauge L-cleats and 15.5 gauge 1/2″ crown staples from 1-1/2″ to 2″ for both types of fasteners. The dual handle design allows you to use either the short handle or extended handle, depending on whether you prefer to kneel or stand during installation. This convenient option combined with a light strike bumper will really save your back and reduce fatigue when working for long shifts. The semi-quick release nose allows for easy jam removal in the event of a jammed fastener and increases productivity. Professional results are ensured with a no mar foot to protect finished working surfaces. Boasting a lightweight and durable aluminum body, aluminum cylinder, and high quality rubber O-rings, this nailer is designed to last. This combo flooring nailer and stapler is perfect for DIYers tackling home improvement and repair projects, as well as construction contractors at the job site. The Pneumatic 2-in-1 15.5-Gauge and 16-Gauge 2″ Dual Handle Flooring Nailer and Stapler includes a wooden handled flooring mallet with a rubber head, three interchangeable base plates, air tool oil, and adjustment tools, and is covered by NuMax’s 1 Year Limited Warranty and 30 Day Wearable Parts Warranty.
-
NuMax SFL618 Pneumatic 3-in-1 15.5/16 Gauge Flooring Stapler/Nailer
$99.77Add to cartThe NuMax SFL618 Pneumatic 3-in-1 15.5-Gauge and 16-Gauge 2″ Flooring Stapler and Nailer is designed for the installation of tongue and groove hardwood flooring. This air powered flooring nail gun and stapler is compatible with 16 gauge T-cleats and L-cleats and 15.5 gauge 1/2″ crown staples from 1-1/2″ to 2″ for all three types of fasteners. Two interchangeable no mar base plates allow you to install 1/2″ to 3/4″ flooring while protecting finished flooring surfaces, ensuring professional results for DIYers tackling home improvement and repair projects as well as construction contractors at the job site. Durably constructed of die cast aluminum and heat treated steel parts, this tool is both rugged and lightweight. The ergonomically designed handle has a rubber grip, providing for additional ease of use during long shifts. Recent upgrades include a smaller tool body, a semi-quick release for easier access to the drive blade to clear jams, a magazine cover for smooth fastener feeding, and an improved base plate design. The value provided by the revolutionary design of this innovative tool comes at far less expense than three separate tools. The Pneumatic 3-in-1 15.5-Gauge and 16-Gauge 2″ Flooring Nailer and Stapler includes a white rubber mallet, air tool oil, and adjustment tools, and is covered by NuMax’s 1 Year Limited Tool Warranty and 30 Day Wearable Parts Warranty.
-
OE Solutions Alternator Clutch Pulley
$81.81Read moreImproved to address vulnerabilities in the original design, this Alternator Pulley effectively resists the heat and dust that can cause the clutch and bearing to fail. It also provides convenience at an affordable price. Save time, money and labor by replacing only the pulley-instead of the entire alternator. All Dorman products are engineered in the United States and backed by 100 years of automotive aftermarket experience. Our solutions are thoroughly tested and inspected, and if you experience any difficulty installing or using our parts, we have a dedicated technical support team of ASE Blue Seal certified professionals ready to help. To learn more about our quality and innovation, visit DormanProducts.com.
