Product details
Engine Water Pump
Specifications
| MPN | BBSC43071BH |
| Manufacturer | Gates |
| Brand | GATES CORP |
| Age Group | adult |
| Gender | unisex |
| Size | All |
| Weight | 4.96 lb |
Related products
-
Basement Watchdog Emergency Battery Backup Sump Pump System
$129.74Read moreThe Basement Watchdog Emergency Battery Backup Sump Pump can be easily installed in either a normal sized or narrow sump pit and automatically begins pumping during power outages, when the main pump fails or when water flow exceeds the capacity of the main pump.Its unique monitoring system sounds an alarm when maintenance is needed or a problem arises. A display panel indicator light will identify the cause of the alarm and the proper corrective action.The dual float switch provides double the protection and will activate the backup pump when either float is raised.
-
Wayne, SPF33 Submersible Sump Pump, 1/3 Horsepower
$106.44Add to cartWayne, SPF33 Submersible Sump Pump, 1/3 Horsepower Sump Pumps are automatic pumps used to remove ground water from sump pits. The most common application is to pump water from a pit located in the basement that collects groundwater from a perimeter drainage system designed to prevent basement flooding. Features: Submersible coated steel and thermoplastic sump pump with tether float switch1/3 HP; max. flow rate is 3600 Gallons Per Hour; 2500 GPH at 10 ft. of discharge liftFor use in 11 in. diameter or larger sump basins; 9 in. ON level and 4 in. OFF levelTop suction pump design eliminates air locks and clogging from debris in bottom of sump pitFully submersible1-1/2 in. NPT discharge for standard plumbing installationDurable construction materials.
-
Little Giant 506158 1/3 Hp 115 Volt Automatic 6-Cia Sump Pump 10′ Cord – All
$138.93Read moreThe Little Giant 506158 1/3 HP 115 Volt Automatic 6-CIA Sump Pump 10′ Cord is designed for continuous duty for residential and light commercial use. This unit has a 115 Volts, 9.0 Amperes, and 720 Watts power specifications. It has a 10-foot power cord 18/3 SJOW-A and mechanical shaft seals including stainless steel spring, nitrile parts, carbon, and ceramic faces. A 1/3 HP shaded pole motor with thermal overload protection is also part of its design aside from an oil-filled motor housing for lifetime lubrication and rapid heat dissipation. It also has an upper and a lower sintered sleeve bearings for extended motor life. This pump features a 1-1/2-inch discharge with a maximum lift of 18 feet. Polycarbonate cover and polypropylene volute-base as well as cast iron pump housings with a protective epoxy coating for corrosion and rust resistance. This pump also includes a 1-1/4-inch adapter and 3/4-inch Garden Hose adapter for convenience. It also works with automatic operation with pressure switch operating pump when the water level is between 7 inches and 10 inches then the pump will shut off when the water level falls to between 1 inch and 4 inches. Pressure switch is non-adjustable.
-
12 Vdc 4.0 Gpm 60 PSI Seamless M – All
$190.39Read moreFour Chamber Diaphragm; 4 Gallon Per Minute; 1/2 Inch NPSM Inlet/ Outlet; 10.02 Inch Length x 4.92 Inch Width x 4.82 Inch Height; 12 Volt DC; With Thermal Over Load Protection; With Pistol Grip Plastic Spray Nozzle/ Two 1/2 Inch NPT Hex Wing Nut x 3/4 Inch Hose Barb Swivel Straight Adapter/ One 1/2 Inch NPT Hex Wing Nut x 3/4 Inch NHRM Swivel Straight Adapter/ 1/2 Inch NPT Hex Wing Nut x 1/2 Inch NPSM 50 Mesh Strainer Swivel Straight Adapter.
