Shop
Showing 2289–2304 of 2401 results
-
Wayne, RPP50 1/2 Horsepower Cast Iron Sewage Pump with Tether Float Switch
$174.15Read moreWayne, RPP50 1/2 Horsepower Cast Iron Sewage Pump with Tether Float Switch Sewage Pumps are automatic pumps used when liquid being pumped contains solids up to 2″ in diameter. Pumping waste from a bathroom to a sewer or septic line is a common application. Features: 1/2 HP; max. flow rate is 5700 Gallons Per Hour; 3240 GPH at 10 ft. of discharge liftDurable, cast iron submersible sewage pump2 in. NPT discharge capable of handling up to 2 in. solidsIdeal for basement or below grade installationsWill replace most sewage pumps without any plumbing changesPiggy-back tether float switch for automatic or manual operationDesigned for 18 in. diameter or larger sewage basinsPumps designed to handle 2 in. solids.
-
Wayne, SPF33 Submersible Sump Pump, 1/3 Horsepower
$98.32Add to cartWayne, SPF33 Submersible Sump Pump, 1/3 Horsepower Sump Pumps are automatic pumps used to remove ground water from sump pits. The most common application is to pump water from a pit located in the basement that collects groundwater from a perimeter drainage system designed to prevent basement flooding. Features: Submersible coated steel and thermoplastic sump pump with tether float switch1/3 HP; max. flow rate is 3600 Gallons Per Hour; 2500 GPH at 10 ft. of discharge liftFor use in 11 in. diameter or larger sump basins; 9 in. ON level and 4 in. OFF levelTop suction pump design eliminates air locks and clogging from debris in bottom of sump pitFully submersible1-1/2 in. NPT discharge for standard plumbing installationDurable construction materials.
-
Weller 1-Handle Shower Only Trim Kit in Tuscan Bronze
$86.57Add to cartThe Weller collection is the new standard for transitional style. The gracefully arced spouts and angled handles work together to complement a wide range of decor, making Weller the ideal selection for those who want to update or upgrade their bathroom.
-
Weller2-Handle 4″ Centerset Bath Faucet in Tuscan Bronze
$139.46Read moreThe Weller collection is the new standard for transitional style. The gracefully arced spouts and angled handles work together to complement a wide range of decor, making Weller the ideal selection for those who want to update or upgrade their bathroom.
-
WEN 12-Inch Benchtop Disc Sander with Miter Gauge and Dust Collection System
$119.88Add to cartRemember when you could sand giant workpieces? Take on the biggest and the baddest with the WEN 12-Inch Benchtop Disc Sander. Our powerful 8-amp motor features a direct-drive design to maximize torque during operation. The spacious 5.5-by-15.5-inch table bevels up to 45 degrees for angled pieces. Combine that with the sliding miter gauge for a versatile sander that meets the needs of a variety of projects. This package also includes a pre-installed adhesive-backed 60-grit sanding disc, an onboard 2-inch dust port, and a 2.5-inch-diameter dust hose. And because its a WEN product, your disc sander comes backed by a two-year warranty, a nationwide network of skilled service technicians, and a friendly technical support line, all to make sure you remember WEN.
-
WEN 13-Piece Professional-Grade Ratcheting SAE Combination Wrench Set with Storage Rack
$50.40Read moreRemember when you had wrenches that lasted Between the professional-grade, heat-treated, fully-polished chrome vanadium steel, this WEN Combination Wrench set is the last wrench set you’ll ever have to buy. Our 12-point ratcheting box ends allow users to tighten or loosen bolts with maximum efficiency. This set includes 13 different sized wrenches without skipping any sizes: 1/4 inch, 5/16 inch, 3/8 inch, 7/16 inch, 1/2 inch, 9/16 inch, 5/8 inch, 11/16 inch, 3/4 inch, 13/16 inch, 7/8 inch, 15/16 inch, and 1-inch wrenches. Each wrench features 72 internal ratcheting teeth for a 5-degree swing, making easy work of tricky fasteners. The included storage rack provides a simple solution for organization and transportation, keeping your wrenches accessible whenever you need them. And because its a WEN product, if any of your wrenches ever break, just notify us and we’ll provide a replacement. Remember when you had the best of the best Remember WEN.
-
WEN 16-Inch Two-Direction Variable Speed Scroll Saw, 3921
$91.86Add to cartRemember when your scroll saw could cut in two different directions? Take on the most intricate and artful cuts with the WEN 16-Inch Variable Speed Two-Direction Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16-by-10-inch table bevels up to 45 degrees for angled cut. The adjustable air pump clears saw dust from your work area to give you a clear line of vision as you cut. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires. This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece. For pinned blades, simply pop the pins out of the front holder and turn the blade 90 degrees. Now, your cuts are no longer confined by the 16-inch throat of the scroll saw. On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation. Onboard blade and holder storage creates simple organization solutions between jobs. And because its a WEN product, your scroll saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.
-
WEN 18-Gauge 3/8-Inch to 2-Inch Pneumatic Brad Nailer
$42.00Read moreRemember when you could build whatever you wanted. Nail nails and fasten fasteners with the WEN 18-Gauge 2-Inch Pneumatic Brad Nailer. Fire 18-gauge brads anywhere from 3/8 to 2 inches in length. Our spring-loaded magazine makes for quick and easy reloads with enough space to hold up to 106 nails. The lightweight body combined with the rubber-lined handle limit fatigue during long days on the job. Operating pressure ranges from 60 to 115 PSI with the nailer consuming 0.028 CFM of air per nail at 88 PSI. The 1/4-inch NPT air inlet allows for quick connection to your favorite air compressor. Adjust the firing depth of the nailer with the simple turn of the depth adjustment wheel. Check the number of remaining nails through the gauge window mounted on the side of the magazine. Unlatch the front nose to clear jams quickly and easily. Adjustable air exhaust lets users direct the pneumatic air output in any direction while the powder-coated finish prevents wear and tear to the nailer’s body. And, because it’s a WEN product, your nailer comes backed by a two-year warranty and a friendly customer help line all to make sure you remember WEN.
-
WEN 20-Volt MAX Lithium-Ion Cordless 1/4-Inch Impact Driver w/ Battery, Bits, Charger and Carrying Bag
$49.32Add to cartRemember when you weren’t bound by cords? Drill whatever you want, whenever you want with the WEN 20V MAX Lithium-Ion Cordless 1/4-Inch Impact Driver. Take on wood, metal, plastics, and more with torque that measures up to 950 inch-pounds in rotational power. The keyless quick-release hex chuck accepts bits 1/4 of an inch in size while the onboard LED light illuminates your workpiece during operation. The compact six-inch head allows for users to drill in confined areas and from awkward angles. And, with a lightweight design weighing in at a mere 2.7 pounds and a rubber-backed contoured grip handle, you’ll be able to limit fatigue during those long days of drilling. The 1.5 amp-hour 20V max lithium ion battery has no memory and holds a longer charge when compared to its nicad equivalent. The pressure-sensitive variable speed trigger operates anywhere from 0 to 2,600 RPM with an impact frequency of 0 to 3,400 taps per minute for maximum versatility on the job site. This package also includes a charger, a belt clip, two drill bits and a contractor’s bag for easy transportation and storage. And, because its a WEN product, your purchase comes backed by a two year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN. Remember when you had nearly 1000 inch-pounds of torque hanging from your belt? Remember WEN.
-
WEN 24-by-12-Inch Drill Press Table with an Adjustable Fence and Stop Block, DPA2412T Workbenches
$39.12Add to cartRemember when you could support your big old workpieces. Take your drill press to the next level with the WEN Drill Press Table. Onboard rulers maximize accuracy for precise and even cuts while the adjustable fence slides back and forth to fit the needs of any project. The sturdy 1-inch thick MDF body prevents warping and wobbling during operation while the fence’s stop block adjusts along the fence to help center your workpiece. The removable insert allows users to drill completely through their workpiece without damaging the table. Including the WEN 8-Inch Drill Press (model 4208), the WEN 10-Inch Drill Press (models 4210 & 4212), the WEN 12-Inch Drill Press (model 4214), the WEN 15-Inch Drill Press (model 4225), and the WEN 17-Inch Drill Press (model 4227). Although this drill press was designed with WEN in mind, it’s universal fit allows for installation on the majority of drill presses on the market. Simply tighten the mounting clamps onto tables anywhere from 5 to 16 inches in width. And, because its a WEN product, your drill press table comes backed by a friendly customer help line and a two-year warranty, all to make sure you remember WEN.
-
WEN 2500 PSI Tie Rod Hydraulic Cylinder with 2.5 in. Bore and 30 in. Stroke
$124.55Read moreRemember when you had a cylinder that lasted? Maximize reliability in agriculture, construction, manufacturing, machinery, and more with a WEN Tie-Rod Hydraulic Cylinder. This double-acting steel-welded tie-rod hydraulic cylinder creates operating pressures of 2500 PSI. The 3/8-inch NPT port size attaches easily to any standard hydraulic hose. With a 2.5-inch bore and a 30-inch stroke, this durable cylinder goes from a retracted length of 40.25 inches all the way out to an extended length of 70.25 inches. This cylinder also includes a reinforced O-ring tube seal, a cold-drawn tube to maximize seal life, a 1-inch diameter zinc-plated steel pin, a high-tensile ground and polished chrome-plated rod, an ASTM A536 65-45-12 ductile iron piston, and ductile iron female clevises with grade 8 clamp nuts. And because its a WEN product, your tie rod cylinder comes backed by a two-year warranty, a stocked inventory of replacement parts and a two-year warranty, all to make sure you remember WEN.
-
WEN 3-1/4″ 6 Amp Electric Hand Planer, 6530
$38.43Add to cartRemember when you needed to smooth out those joists. Plane away chips, splinters and misshapen edges with the WEN 6 Amp 3-1/4 Inch Electric Hand Planer. Perfect for fixing stubborn doors and fitting wood. This power planers 6-Amp motor delivers over 34,000 cuts per minute to your workpiece, slicing away any irregularities until the surface of your boards are aligned and smooth. With a cutting width of 3-1/4 inches and a maximum cutting depth of 1/8 inch, you’ll have the perfect companion for fitting and squaring boards. The 16 positive stops increase in increments of 1/128-inch anywhere from 0 all the way up to 1/8 inches. The base plate shoe even includes a V-shaped groove for easily flattening sharp post corners. Aside from the power planer. The parallel fence provides an accurate and straight cut by making sure your strokes are directly parallel to the edge of the wood (a must have for planning door edges, wood trim and boards). The kickstand protects both the blade, and the workpiece in between uses by keeping the blade, elevated and out of contact from the surface of your project. Finally, the dust bag collects all of your loose shavings to keep your workspace clean and sawdust free. The bag attaches to both the left or right hand side of the planer to fit whatever your preference may be. And because this is a WEN Product, your 6 Amp 3-1/4 Inch Electric Hand Planer comes backed by a 2-year warranty, a friendly customer help line, and a nationwide network of skilled service technicians. Remember when you had a reliable planer that lasted for years. Remember WEN.
-
WEN 3.2-Amp 8-Inch by 12-Inch Variable Speed Mini Benchtop Wood Lathe
$181.65Read moreRemember when you could turn your own pens? Fill your house with as many pens as you can with the WEN 8-Inch by 12-Inch Variable Speed Mini Wood Lathe. Adjust the variable speed anywhere from 750 to 3200 rotations per minute. The WEN 8-Inch by 12-Inch Variable Speed Benchtop Wood Lathe features an MT1 spindle and tailstock taper to tightly grip workpieces, two tool rests (4-1/2 inch and 7 inch) to provide needed support for chisels and tools during operation, and a 3.2-amp motor to keep things turning. The easy-to-use lever clamping system makes adjustments to both the tool rest and the tailstock simple and precise. The WEN Wood Lathe also includes a flat wrench, a headstock spur center, a tailstock cup center, a knockout rod and a 2.3-inch faceplate for non-spindle workpieces. And, because its a WEN product, your lathe comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn pens, chess pieces and more? Remember WEN.
-
WEN 3.5-Amp Oscillating Spindle Sander, 6510T
$99.90Add to cartRemember when you used to have to sand those rounded edges by hand. With the WEN Oscillating Spindle Sander you’ll never have to face that problem again. This is the ultimate sanding tool for quickly and easily smoothing out arcs, curves, contours and odd shapes. The plates and drums are easy to swap in and out and the lightweight design allows for easy mobility if need be. However, just because the compact design weighs in at a mere 30 pounds does not mean that we’ve sacrificed power. The WEN Oscillating Spindle Sander features a smooth and quiet 1/2HP 3.5 Amp motor while the sanding spindle moves up to 58 oscillations and 2000 rotations per minute with a 5/8 inch stroke. Our package includes six sanding sleeve attachment sizes (1/2, 3/4, 1, 1-1/2, 2 and 3 inches) and five rubber drums to allow for a full range of curves to match whatever the situation calls for. Meanwhile, the onboard storage keeps the spindles, sleeves, table inserts and spindle washers organized and accessible for quick changes. The dust port provides the option to attach dust extractor to collect the airborne dust particles, ensuring a cleaner working surface and shop so you can keep building. And because it’s a WEN Product, our Oscillating Spindle Sander is also backed by a two-year warranty, a friendly and knowledgeable customer service hotline and a national network of experienced service technicians. It’s time to make any difficult sanding task a breeze, allowing for maximum creativity with any woodworking project. Remember when you could easily sand any curve or edge your heart desired.
-
WEN 4.3-Amp 4 X 36-Inch Belt and 6-Inch Disc Sander with Cast Iron Base, 6502T
$85.86Add to cartRemember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so youll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, youll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.
