Shop
Showing 529–544 of 2376 results
-
BLACK+DECKERâ„¢ DR260C 3/8″ 5.2 AMP Corded Drill/Driver
$42.08Add to cartThe BLACK+DECKER DR260C 5.2 Amp 3/8″ Drill/Driver is powerful and compact, capable of handling tough tasks in tight spaces. This drill operates from 0-1,500 rpm, features a keyless chuck for quick and easy bit changes, along with variable speed for controlled drilling and driving. The on-board bit storage allows for quick access to screwdriving bits. This drill is perfect for drilling holes in wood, metal and plastic, and driving screws to fasten a variety of material. Includes: (1) DR260 Drill/Driver, (1) Double-Ended Screwdriving Bit.
-
Boen BA-20040 Big Apple PVC Coated Safety Netting, 4 Ft. X 150 Ft., Orange
$124.34Read moreBoen BA-20040 Big Apple PVC Coated Safety Netting, 4 Ft. x 150 Ft., OrangeBigApple PVC-Coated Debris Safety Netting is strong, fire retardant and lightweight. This netting is made from PVC-coated polyester and has reinforced borders for added strength. Used for construction and demolition protection, as a guard rail, and vision barrier.
-
Bon 11-831 Hand Set – Blunt Point Carbide 1 1/2-inch
$158.95Add to cartA Carbide Hand Set is used to pound off stone along the edge of a flat smooth stone. It is used along a chalk line to produce dimensioned stone. The entire blade should be placed on the stone and angled back just a little before striking with a hand hammer. As the stone falls off, the set is moved forward along the line for continued striking and stone removal. If the stone is not smooth and the carbide resets on few high spots of rough stone, the carbide can be expected to fracture. The wide end of the carbide blade should never be used to cut stone. Always wear eye protection when using a chisel.
-
Bon 11-834 Hand Set – Blunt Point Carbide 3-inch
$224.37Read moreA Carbide Hand Set is used to pound off stone along the edge of a flat smooth stone. It is used along a chalk line to produce dimensioned stone. The entire blade should be placed on the stone and angled back just a little before striking with a hand hammer. As the stone falls off, the set is moved forward along the line for continued striking and stone removal. If the stone is not smooth and the carbide resets on few high spots of rough stone, the carbide can be expected to fracture. The wide end of the carbide blade should never be used to cut stone. Always wear eye protection when using a chisel.
-
Bon 11-836 Hand Tracer – Chisel Point Carbide 2-inch
$136.89Add to cartA Carbide Hand Set is used to pound off stone along the edge of a flat smooth stone. It is used along a chalk line to produce dimensioned stone. The entire blade should be placed on the stone and angled back just a little before striking with a hand hammer. As the stone falls off, the set is moved forward along the line for continued striking and stone removal. If the stone is not smooth and the carbide resets on few high spots of rough stone, the carbide can be expected to fracture. The wide end of the carbide blade should never be used to cut stone. Always wear eye protection when using a chisel.
-
Bon 11-837 Hand Tracer – Chisel Point Carbide 3-inch
$184.01Read moreA Carbide Hand Set is used to pound off stone along the edge of a flat smooth stone. It is used along a chalk line to produce dimensioned stone. The entire blade should be placed on the stone and angled back just a little before striking with a hand hammer. As the stone falls off, the set is moved forward along the line for continued striking and stone removal. If the stone is not smooth and the carbide resets on few high spots of rough stone, the carbide can be expected to fracture. The wide end of the carbide blade should never be used to cut stone. Always wear eye protection when using a chisel.
-
Bondhus – L-wrench – Hex Ball Tip Stubby 4mm Bulk 50pk – 26560
$54.90Add to cart4mm Stubby Balldriver L-wrench – 26560 Stubby Balldriver Tip Hex Key L-wrench w/ProGuard Finish. Long Arm. Bulk Qty of 50. Size: 4mm Length: 110mm. 6.00 L. 2.50 W. 1.75 H. Bondhus tools are designed and manufactured to be strong and save time. Bondhus’ exclusive manufacturing processes ensure the highest level of machining consistency as each tool is machined to incredibly tight tolerances. The chamfered tip makes insertion of the tool into a screw head much easier. Bondhus hex tools always insert smoothly and seat to full depth for optimal torque and longer tool life. All Bondhus tools are manufactured with Bondhus’ exclusive Protanium steel, which is up to 20 percent stronger than competitor tools.
-
Bondhus 20599 Stubby L Hex Key Set
$38.70Read moreHex Ball End Wrench Set, L Shaped, Stubby, .050″ to 3/8″ in Case and 1.5mm to 10mm in Case, Carded Features and Benefits: Angle entry up to 25 Degrees on sizes .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8-Inch and 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm Low profile short arm reaches screws with low overhead clearance, that are inaccessible with any other type of hex tools Tools are Made in the USA with Bondhus proprietary Protanium steel and are up to 20 percent stronger than competitor tools ProGuard Finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time Bondhus Stubby tools are designed and manufactured to be strong, to save time and fit into low overhead locations that are too short for a standard hex or ball end wrench. The low profile short arm has a smaller inside radius that allows the tool to be used in very tight spaces. Compact Balldriver L-Wrench sets are perfect where a variety of tool sizes are required. All sets are packaged in our patented Bondhex tool case. Wrenches slip easily into individually marked slots and twist to lock securely in place. Only available from Bondhus, Protanium steel means these are the strongest ballpoint L-Wrenches available.
-
Bondhus Set 9 Balldriver Screwdrivers
$35.10Add to cartBall End Tip Screwdriver 9 Piece Set w/ProGuard Finish. Sizes: 1.5mm – 10mm. Bondhus screwdriver tools are designed and manufactured to be strong and save time. Bondhus is the only hand tool manufacturer to design handle sizes proportional to the strength of the tool tip. This attention to detail reduces the possibility of applying too much torque to the tool tip, which could result in stripping or breaking of the tool tip or the screw head. All handles have cushioned surfaces to reduce fatigue during use and to improve grip, when hands are wet or oily.
-
Bosch 11304 Demo Hammer Replacement On/Off Switch # 1617200108
$51.28Add to cartIncludes (1) 1617200108 Switch New, Bulk Packed Genuine OEM Replacement Part # 1617200108 Consult owners manual for proper part number identification and proper installation Please refer to list for compatibility Compatible with the following: Bosch models: 11304, 11304, USH27 2 230v
-
Bosch 1191VSRK-RT 7 Amp Single Speed 1/2 in. Corded Hammer Drill (Refurbished)
$56.85Add to cartLightweight design is perfect for small diameter drilling applications 7 amp motor provides the highest performance to weight ratio in its class 360 Degree auxiliary handle with built-in quick release depth gauge provides wide range of movement along with consistent drilling depth Compact design with an aggressive impact mechanism in combination with a more powerful motor that outperforms the competition 2-mode selector easily converts from rotation only to hammer drill
-
Bosch 4100 Table Saw Replacement 120V Speed Control # 2610997306
$43.03Add to cartIncludes (1) 2610997306 Speed Control New, Bulk Packed Genuine OEM Replacement Part # 2610997306 Consult owners manual for proper part number identification and proper installation Please refer to list for compatibility Compatible with the following: Bosch models: 4000, 4100, 4100DG-09 Worksite, 4100DG-09 Worksite, 4100-09 Worksite, 4100-09 Worksite
-
Bosch Tronic Electric Tankless Water Heater
$179.01Read moreUltra compact and lightweight, these five point-of-use / under-sink tankless water heaters were designed to provide an endless supply of hot water for 1 kitchen and / or bathroom sink at a time in commercial and residential applications. Advantages include 98 percent efficiency with minimal stand-by loss. Most models come equipped with high / low kW settings and universal horizontal / vertical mounting options.
-
Bostitch 2-3/8″ 10 Ga. Angled Strip Framing Nails 28 deg. Ring Shank 2000 pk
$43.00Read moreThe Bostitch S8DR-FH 2-3/8″ x 10 gauge wire 2000 galvanized smooth-shank 28° framing nails feature galvanized steel construction and a wire-weld collation for durability. The nails have an offset round head. They are ACQ-rated thick-coat galvanized for use in most treated lumber.
-
Bostitch 2608123 2.5 in. Stainless Steel 15 Gauge Finish Nail
$50.76Add to cart2.5″ Stainless Steel 15 Gauge Finish Nail We provide a wide range of products to satisfy all houseware and supplies. We are dedicated to give everyone the very best houseware supplies for all home needs, with a focus on dependability, our client satisfaction and great quality. We provide high-quality modern products to be enjoyed by many clients. Our aim is continuous improvement and user satisfaction through effective implementation and quality of our products. Features Made with high quality material Durable constructionSpecifications Thickness: 15 Gauge Material: Stainless Steel Size: 2.5 in. – SKU: ACHR159743
