Shop
Showing 1121–1136 of 2871 results
-
Extreme Max 5001.6049 Aluminum Work Station Storage Cabinet Flip-Out Work Tray with Paper Towel Rack Organizer for Enclosed Race Trailer Shop Garage S
$165.70Read moreExtreme Max’s Flip-Out Storage Cabinet folds down to create a 14″ x 24″ workstation and two storage shelves. The bottom of the work station contains a paper towel holder that holds two standard paper towel rolls side by side. Both shelves are deep enough to fit a variety of supplies, such as aerosol cans and quart-sized jugs. The workstation locks into the raised position when not in use. The cabinet contains pre-drilled mounting screw holes for ease of installation. Due to the variety of surfaces to which the cabinet may be mounted, mounting hardware is not included.
-
EZ-FLO 10361 Wall-Mount Service Faucet – Chrome
$121.73Read moreEZ-FLO’s Wall-Mount Service Faucet is made of heavy-duty solid brass to last through the wear-and-tear of commercial use. Hose threads on the spout make it simple to connect a water hose. This wall-mounted faucet includes a bucket hook for convenience on the spout. This faucet is not intended for drinking water.
-
Fasco F1B 54DF-18 Single Shot Pneumatic Fine Wire Crown Staple Gun Stapler Tool
$104.74Read moreIf you’ve got some furniture to upholster, a curtain to hang, or any other stapling project, this Fasco F1B 54DF-18 Pneumatic Air Stapler Tool just might be your go-to solution. This pneumatic staple gun works with 1/4- to 3/4-inch crown staples like those from the Duo Fast 54 series. You can load up to 110 staples in its bottom-loading magazine and reload it 1-handed if that’s not enough to get the job done. It’s rubber no-slip grip lets you work 1-handed and it reduces the vibrations you feel so you can work longer with less fatigue. If you want a job to stick when it’s done, then get your hands on the Fasco Air Stapler and don’t let go.
-
Fasco F1B SR5-16 Pneumatic Air Fine Wire Upholstery Crown Staple Gun Stapler
$99.43Read moreIf you’ve got some furniture to upholster, a curtain to hang in the basement, or any other fasten-ating home-improvement project, then look no further: the Fasco F1B SR5-16 Stapler is here. This pneumatic staple gun works with 1/4- to 5/8-inch crown staples like those from the Bostitch SB5019, Prebena P and Senco F/5 series staples. You can load up to 110 staples in its bottom-loading magazine and reload it 1-handed if that’s not enough to get the job done. It’s rubber no-slip grip lets you work 1-handed and it reduces the vibrations you feel so you can work longer with less fatigue. If you want a job to stick when it’s done, then get your hands on the Fasco Air Stapler and don’t let go.
-
Fasco FB SR5-16 Pneumatic Single Shot Fine Wire Wide Crown Staple Gun Stapler
$98.77Add to cartThe whole idea of a staple gun is to get a tough job done quick That’s why the Fasco Pneumatic Fine Wire Stapler is built with speed and versatility at the heart of its design. High pressure shots of up to 100 PSI of air can push staples ranging from 1/4 to 5/8 of an inch into wood, upholstery, and more. 110 staples in one magazine makes for less time refilling and more time putting that power to use. To support that speed with control, it’s built with a long, narrow nose for increased visibility. Because honestly, a staple isn’t doing anything if it isn’t in the right place. For working with the confidence that every shot made will count, the FASCO Pneumatic Fine Wire Stapler can be the tool to help.
-
Fellowes AeraMax 90 Small Room Air Purifier
$155.77Read moreThe Fellowes AeraMax 90 Air Purifier uses 4-stage hospital-type filtration to effectively purify air in small rooms 100 – 200 square feet. The AeraSmart Sensor monitors the air quality and automatically adjusts the fan speed to keep your air purified with ultra-quiet operation. A True HEPA filter with AeraSafe antimicrobial treatment safely removes 99.97% of airborne particles as small as 0.3 microns. Backed by a 3-year manufacturer limited warranty.
-
Fellowes, FEL49106, Premium Computer Tool Kit–55 Piece, 1, Black
$52.77Read more55 Piece Computer Tool Kit is great way to maintain and repair computer systems. Uses both metric and standard measurement. Includes Fully Flexible Ratchet Driver (three-way latch); 6-piece precision screwdriver kit; two standard AA batteries; diagonal stripper; small brush; Precision Pen Knife; diagonal cutting pliers; Chip Extractor; Long Nose Pliers; 3-prong parts retriever; electric voltage tester; flashlight with clip; crimp and strip wire stripper; Spare Parts Container (with parts); 6 cable ties; antistatic/antishock wrist band; 2-in-1 combo nut sockets; 3/16″-5mm combo; 1/4″-6mm combo; 5/16″-8mm combo; 11/32″-9mm combo; 3/8″-10mm combo; Phillips bits (0, 2); Torx driver bits (T8, T10, T15, T20, T27); 2 hollow Torx driver bits (T10H, T15H); Adapter bit for ratchet driver; No. 1 Pozidriver bit; bit holder; slotted bits; Square bits; S0, S1, S2, S3; No. 0 and 2 Phillips bits; insulated tape (1 roll); four surface wipes. Demagnetized tools come in zippered storage case.
-
FenceMate 4 Slot Crimping Swaging Tool Kit to Join High Tensile Steel Wires, Ropes with 4 Sizes Assorted Sleeves, Spanner & Gauge Tool, 18″ Hand Crimper Swager for Splicing Wires, Ropes with Ferrules
$46.40Add to cartThe Tool Kit comes with one 18 inch, 4-slot crimping (swaging) tool and 4 sizes of assorted crimp sleeves, one tool gauge (to check wire gauge) and ring spanner (to adjust screw) The Tool Kit allows a wide range of metal wires, wire ropes or cables to be swaged (crimped, spliced) with loop, oval, stop sleeves, ferrules, especially excellent performance for high tensile steel fence wires with our gritted crimp sleeves. Steel blade drop forged for super hardness, cast joint arms cast to assure high strength. Thickened, anti-slip, insulated, ergonomic rubber handle provides secure and comfortable experience. #1-2 slot for 14.5 and 15.5 gauge wire; #2-3 slot for 12.5 gauge wire; #3-4 slot for 10 and 11 gauge wire, 14 and 15 gauge barbed wire; #4-5 slot for 9 gauge wire, 12.5 and 13.5 gauge barbed wire.
